Heavy Duty Anodized Aluminum Full Mortise, Short Leaf Inset Continuous Ggeared – are designed mainly for new door applications in child care and nursing facilities. These hinges require extra clearance. Also available in standard duty models.

• Applied to conceal both leaves.
• BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
• Fasteners are No. 12-24 x 11/16″ #10 Head FHUC, Type C, threadforming, no tapping required.
• Heavy duty model: 20 fasteners required for each leaf.
• Wood screws available on request (specify on order).
• Heavy duty hinge (HD1): 3″ between bearing centers.
• Heavy duty hinge (HD3): 3″ between bearing centers.
• HD1 hinges conform to Grade 2-150, Grade 1-300, and Grade 1-600 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
• HD3 hinges conform to Grade 3-150, Grade 3-300, and Grade 3-600 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
• All hinges meet criteria of UBC 7.2 for positive pressure.
• Special patented FirePins are only required on 3-Hour (A-Label) assemblies.
• Certain door and frame conditions may require an extra 1/32″-1/16″ clearance. Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80.
• PemkoHinge^® products are guaranteed for the life of the opening against defects in material or workmanship with the exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
• Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for heavy duty models: 83″ and 85″ = 27 bearings, door weight = 540 lbs.; 95″ = 31 bearings, door weight = 620 lbs.; 120″ = 39 bearings, door weight = 780 lbs.
• Special hinge reinforcements are not required. Hollow metal door and frame manufacturers’ standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised.
• Width: 13/16” (20.6 mm) (between frame edge and door edge, square edge door applications).
• Width: 27/32” (21.4 mm) (between frame edge and door edge, beveled edge door applications).
• Cap Width: 25/32” (19.8 mm).
• Height: 1-1/2” (38.1 mm) (frame edge side – leaf).
• Height: 1-19/32” (40.5 mm) (to flange/door edge side – leaf).
• Weight

Ratings

BHMA Certified

Finishes

CFMSLISF-HD1/3: C – Clear Anodized Aluminum

DFMSLISF-HD1/3: D – Dark Bronze Anodized Aluminum

     GFMSLISF-HD1/3: G – Gold Powder Coat

     BSPFMSLISF-HD1/3: BSP – Black Suede Powder Coat

     WSPFMSLISF-HD1/3: WSP – White Suede Powder Coat

     SNFMSLISF-HD1/3: SN – Satin Nickel Powder Coat

     10BEFMSLISF-HD1/3: 10BE – Satin Bronze Powder Coat