Standard Duty Anodized Aluminum Full Mortise, Short Leaf Inset Continuous Geared – designed mainly for new door applications in child care and nursing facilities. These hinges require extra clearance. Also available in heavy duty models.

• Applied to conceal both leaves.
• BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
• Fasteners are No. 12-24 x 11/16″ #10 Head FHUC, Type C, threadforming, no tapping required.
• Standard model: 16 fasteners required for each leaf.
• Wood screws available on request (specify on order).
• Standard duty hinge. 6″ between bearing centers.
• Standard duty hinges conform to Grade 3-150 and Grade 3-300 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
• All hinges meet criteria of UBC 7.2 for positive pressure.
• Special FirePins are only required on 3-Hour (A-Label) assemblies.
• Certain door and frame conditions may require an extra 1/32″-1/16″ clearance. Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80.
• PemkoHinge^® products are guaranteed for the life of the opening against defects in material or workmanship with the exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
• Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for standard models: 83″ and 85″ = 14 bearings, door weight = 280 lbs.; 95″ = 16 bearings, door weight = 320 lbs.; 120″ = 20 bearings, door weight = 400 lbs.
• Special hinge reinforcements are not required. Hollow metal door and frame manufacturers’ standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised.
• Width: 13/16” (20.6 mm) (between frame edge and door edge, square edge door applications).
• Width: 27/32” (21.4 mm) (between frame edge and door edge, beveled edge door applications).
• Cap Width: 25/32” (19.8 mm).
• Height: 2-3/8” (60.3 mm) (to top cap/frame edge & door edge sides).
• Height: 1-1/2” (38.1 mm) (frame edge side – leaf).
• Height: 1-19/32” (40.5 mm) (to flange/door edge side – leaf).
• Weight:

Ratings

BHMA Certified

Finishes

     CFMSLISF: C – Clear Anodized Aluminum

     DFMSLISF: D – Dark Bronze Anodized Aluminum

     GFMSLISF: G – Gold Powder Coat

     BSPFMSLISF: BSP – Black Suede Powder Coat

     WSPFMSLISF: WSP – White Suede Powder Coat

     SNFMSLISF: SN – Satin Nickel Powder Coat

     10BEFMSLISF: 10BE – Satin Bronze Powder Coat